Menu Close

Ways to setup Netgear EX2700 with and without WPS

It won’t be wrong to say that Netgear EX2700 is one of the finest wi-fi range extenders available in the market lest you can set it up properly. So, if you are also looking for the best method of Netgear EX2700 setup, you have probably landed at the right place. Once you could set it up properly, you can enjoy high-speed internet connectivity wherever you install it and far off places as well. So, what are you waiting for? Let’s get started.

Netgear EX2700 setup

Netgear wifi extender EX2700 setup

  1. From a suitable browser, go to mywifiext.net
  2. Upon finding the ‘New Extender Setup’ button, tap on it
  3. Now, you will come across some on-screen instructions
  4. Complete the steps as you are directed
  5. Viola! Your extender is all set to use

Netgear EX2700 setup with WPS button

  1. Turn on your Netgear EX2700
  2. Now, keep the extender and wifi router in proximity
  3. Then, plug-in the extender to the power source
  4. Wait until you see the green light blinking
  5. Locate and press the WPS button on the extender
  6. If the Status LED light turns white, the connection is successful

Netgear EX2700 setup without WPS

  1. Plugin the router to the power source and wait for the LED light to turn on
  2. Place the router as well as the extender in the same area
  3. Now, connect your router with the extender using the Netgear EX2700 setup ethernet port
  4. Wait until you see the LED light turn solid green
  5. Now, using your web browser, go to the Netgear Genie page
  6. Here, you need to enter your router login details
  7. Congrats! You have successfully set up your Netgear Extender

How do I perform Netgear EX2700 reset?

In case you are facing issues while using your Netgear EX2700, then one of the many things you can do is reset it:

  1. The first thing you have to do is locate the reset button on the extender
  2. After that, press and hold this button
  3. Continue doing it for at least 10 seconds
  4. Wait for the LED light to turn amber
  5. The reboot process will now begin
  6. Your extender will now undergo a full factory reset

Netgear EX2700 troubleshooting

There are several things you can try to fix issues with your Netgear Extender:

  • Verify that your extender is receiving the proper supply of electricity
  • Check the electrical wires for any damages or faults
  • Ensure that your wifi router is giving a high-speed and stable internet connection
  • Make sure that there is nothing that is obstructing the connection between the extender and the router which means both the devices need to be kept closely together
  • In case you have opted for Netgear EX2700 setup without the WPS button, then you must ensure that you are navigating to the correct web address for the setup
  • Be sure that your extender is fully charged
  • Apart from this, make sure that your extender is equipped with the latest version of the firmware

Conclusion:

By following these procedures, you shall be able to set up your extender appropriately. If not, you can always try these methods. Else, perform a factory reset of your router as well as the extender. Once you do so, you need to perform the Netgear router setup either using the WPS button pin method or any other suitable method of your choice.

Leave a Reply

Your email address will not be published. Required fields are marked *